Unisex Expedite 300 black and white quick-release snowboard bindings

Ref :
Key feature
This snowboard binding has memory tightening for stepping in/out while standing. Adjust it once,. then simply clip/unclip the central hook. Step in, lock and ride!
Users reviews
3.36 / 5 14 ratings

User benefits

Good foot support at average speed, green to red runs.
Fast acting
Ultra-fast thanks to memory tightening. Step in, lock and ride!
Gas Pedal, front/rear highback, memory tightening strap.
EVA foam at the toes and heels.
Anatomic design
M: 35 to 39, L: 38 to 43, XL: 42 to 50.
Wide monostrap, which is articulated at the centre for very comfortable support.

Technical information

M=4-7½ / L=7-10½/XL=10-14
Foam : 50.0% Ethylene Vinyl Acetate (EVA), Foam : 50.0% Stainless steel Frame : 100.0% Polyamide 6.6 (PA6.6)
Designed to :
beginners seeking quick-release bindings for stepping in/out while standing up.
2 years


Storage instructions
Before each trip, tighten all the binding screws. Storing for the summer: you can leave your bindings on the snowboard.

Features of the product

A word from the product manager
The side-entry system of the Expedite 300 is very quick to use, as long as you take the time to correctly adjust them the first time you use them. Once they have been properly adjusted, you no longer have to touch them -: each time you put your boot in the binding, you will have the same setting (memory tightening system).
The Expedite 300 is designed to make riders' lives easier by saving time during boot entry/exit. It offers all the support required for beginners and even advanced riders. It is perfect both on-piste and off-piste. If you go very fast, we recommend that you switch to a traditional binding with an ankle strap (most powerful strap system available) for excellent foot support.
Opening mechanism
Handy tip: for an easy 1st adjustment, position your foot in the binding, fasten the buckles without clipping them and adjust the 2 ratchet buckles to their maximum. When you clip the buckle, you'll already have a good setting. After a few descents, you can adjust more precisely: tightening them a little more provides extra support while normal tightening provides maximum comfort. Note: the big buckle is inside for a more natural opening/closing action.
The available settings
"The factory settings suit most people, however you can adjust the following to suit your needs: - the position of the highback (front/rear/side) by moving the position of the screws that hold it, - highback canting, - the length of the gas pedal, which is particularly useful for people with big feet. The practical gas pedal adjustment requires no tools and you don't need to remove the binding (see instructions)."
Stance (binding spacings)
To be adapted to your body shape, but it is worth noting that all snowboards have a recommended position for bindings (recommended stance, indicated by a marker between the inserts of the bindings). Increasing the stance width will lower your position on the board and improve stability. This also helps for aerial rotations. On freestyle boards, the recommended stance width is generally wider than on all-mountain boards.
Adjusting snowboard binding angles
For on-piste freeride use, we recommend an angle of +18° at the front and 0° at the rear. For multipurpose freestyle use, a +18° and -6° angle is better. An open rear foot gives more flexibility when riding switch. For pure freestyle use, you can choose entirely symmetric angles, e.g. +15° and -15°. Binding angles are very much a matter of personal choice. Feel free to check out what others are doing and try out different options. You may be pleasantly surprised!
Centring of the bindings on a snowboard
Disc bindings with 4 screws can slide along a single axis and generally have 5 possible settings. This setting is used to centre the boot on the snowboard and prevent the foot from protruding too far. Otherwise you are guaranteed to fall! The boot must therefore protrude from the board by an equal amount on both sides. The disc can also be rotated through 90° to alter the stance width in relation to the width set by the inserts. In this case, lateral centring is no longer possible.
Which size should I choose for my Expedite bindings?
We recommend: M = 2.5 to 6 L = 5.5 to 8 XL = 8 to 14 Just as you would try on a boot with your own foot, it is strongly advisable to try out the bindings with your own snowboard boots. Because, depending on the brand, the volume of a particular size of boot may vary.

Users reviews

3.36 / 5 14 ratings
7 users recommended this product
Distribution of the scores
  • Man
    20-29 years old
    01 December 2017
    Use since 1 week or less
    That review has been deposited on this product version
    Nichts für fortgeschrittene Fahrer !

    Da letzten Winter meine Brieftasche etwas schmal aussah, musste ich notgedrungen zu dieser Bindung greifen. Die Bindung hat so gut wie kaum Einstellungsmöglichkeiten, ist extrem weich und geht bei zu starker Belastung einfach auf. Gefährlich !!!

    2 Sterne, weil ich den Schnellverschluss ganz cool finde und die Bindung für Anfänger auf alle Fälle langt.

    Brand's answer :


    Danke, dass du dir die Zeit genommen hast die Snowboard Bindung Expedite 300 zu bewerten. Deine Erfahrungen helfen uns weiter, unsere Produkte zu verbessern.
    Produkte mit denen du unzufrieden bist, kannst du 365 Tage in deiner Fiale zurückgeben.

    Mit sportlichen Grüßen,

  • Man
    40-49 years old
    12 March 2017
    Use since 2 to 8 weeks
    That review has been deposited on this product version
    Top Bindung

    Bin diese Bindung jetzt zweimal gefahren und bin voll überzeugt. Sehr stabil aber der absolute clou ist der schnellverschluss. Mit nur einem Griff ist die Bindung geöffnet oder geschlossen.

  • Man
    30-39 years old
    30 January 2017
    Use since 1 week or less
    That review has been deposited on this product version
    gute bindungen

    hab die mal für einen tag mitgenomen.. haben sich gut gezeigt