Non-slip adhesive pads for snowboards.

Ref :
Key feature
These non-slip adhesive pads stick quickly and will not move thanks to their 3M glue. Good foothold without slipping on the board thanks to the relief points on the pad.
Users reviews
3.5 / 5 2 ratings

User benefits

Structure with relief points for maximum boot grip on the pad.
Non-slip material so the boot doesn't slip on the pad.
3M Scotch tape for a very good bond between the pad and the board.

Technical information

one size
Protection cover : 100.0% Polyvinyl chloride (PVC)
Designed to :
prevent feet from sliding on the snowboard when taking ski lifts.
2 years

Features of the product

Advice for gluing the pad to the board
It is important that you take 4 minutes to stick the pad down properly. 1. The board must be thoroughly cleaned before sticking the pad, using a damp sponge with soap or detergent to remove the grease. 2. Rinse thoroughly to remove any soap. 3. Dry with a cloth 4. Stick the pads where you want them, near the rear binding.
Where should I position the pad
Place the 4 pads where you place your foot when you use a ski lift. Try simulating taking a ski lift before sticking the pad, to see where your rear foot will be. Caution! Do not glue the pads within 4 cm of the screw inserts, otherwise you will no longer benefit from the maximum setting of the bindings.

Users reviews

3.5 / 5 2 ratings
1 users recommended this product
Distribution of the scores

At Decathlon, reviews are reliable.

  • 28 February 2018
    That review has been deposited on this product version

    Avevo paura che si scollassero, mai successo

  • Man
    30-39 years old
    18 January 2018
    Use since 2 to 8 weeks
    That review has been deposited on this product version
    Buono ma costoso

    Il prezzo è troppo alto