Non-slip adhesive pads for snowboard boards

Ref :
8344834
Key feature
These non-slip, adhesive pads can be stuck quickly and will not move thanks to the 3M glue. Good foothold without slippage on the board thanks to its relief and rubber-type material.
£7.99*

User benefits

Traction
Structure with relief points for maximum boot grip on the pad.
Grip
Non-slip material so that the boot does not slip on the pad.
Grip
3M Scotch tape for a very good bond between the pad and the board.

Technical information

Sizes
One size.
Composition
Main part : 100.0% Polyvinyl chloride (PVC)
Designed to :
prevent feet from sliding on the snowboard when taking ski lifts.
Warranty
2 years

Features of the product

Advice on gluing the pad to the board
It is important that you take 4 minutes to stick the pad down properly. 1. The board must be thoroughly cleaned before sticking the pad, using a damp sponge with soap or detergent, to remove the grease. 2. Rinse thoroughly to remove any soap. 3. Dry with a cloth. 4. Stick the pads where you want them, near the rear binding.
Choice of the position of the pads
Place the 4 pads where you place your foot when you use the ski lifts. Try simulating taking a ski lift before sticking the pad, to see where your rear foot will be. Warning! Do not glue the pads within 4 cm of the screw inserts, otherwise you will no longer benefit from the maximum setting of the bindings.

Users reviews

Write the first review

Post a comment
HAUT DE PAGE