Indy 300 Fast Lock 2Z Children's Snowboard Boots - Black, Blue and Yellow

Ref :
Key feature
Rapid tightening on the bottom of the boot for excellent support of the foot. Rip-tab at the top of the boots for a perfect fit on the tibia. A lightweight boot thanks to its EVA sole!

User benefits

Thermal insulation
EVA sole, 80% air. Thick foam on the toes to insulate from the cold.
Easy opening / closing
2-zone Fast Lock system: quick instep tightening and rip-tab at the shins.
Supple flex allows ankle flex for a better position.
10 mm foam heel wedge: comfort and good foot support at moderate speed.
Fitting comfort
Soft foam for maximum comfort.
Ultralight sole, large studs and good grip on all snow types.
Ultralight EVA sole (80% air) for a lighter weight and cushioning.

Technical information

34 > 38
fastening type
2zone fastening
Upper of : 100.0% Polyester (PES) Outer sole of : 100.0% Ethylene Vinyl Acetate (EVA) Warm lining : 100.0% Polyester (PES)
Designed to :
young snowboarders (size 2 to 5.5), from beginner to advanced, looking for a comfortable, forgiving boot.
2 years


Storage instructions
At the end of the day, remove the liners from the uppers to improve ventilation and dry quickly. Also, remove the inner sole from the boot to dry fully overnight.

Features of the product

A word from the product manager
We have reviewed the design of these children's boots. These are a "linerless" boot, which means only one fastening to do up: it's the most practical for children and their parents. For greater comfort, we've also lightened the boot.
Fast Lock 2-zone tightening system
The easy fastening of the Indy 300 comes from a comment made by a snowboard instructor: "You have to stop using traditional laces which require knotting. Too often, I begin my lessons by tightening my clients' laces". We made some improvements to it this winter by adding a rip-tab at the shins for perfect fastening. 1. Quick, powerful tightening focused on the instep, to hold the foot tight, 2. Rip-tab on the shin to eliminate play between shin and tongue.
Boot flex/stiffness
The introduction of the soft flex was a deliberate decision. It provides comfort during use, reduces physical fatigue and allows you to fully enjoy your day in the snow. It has the advantage of helping the beginner adopt the right position on the board: ankles flexed so as not to have stiff legs. You have to react quickly when you're snowboarding so it's important to bend the knees. Starting with a boot that's too stiff will hinder your progress.
Foot support: Comfort Heel Pad ankle foam
The ankle foam padding fills the hollow below and behind the ankle in order to secure the heel. LEVEL 1 boots have soft foam that's 10 mm thick made from a single, softer material. The aim is to provide the right heel/foot support for the type of boot. The faster you go, the more energy comes into play, the more support your foot needs. Comfort Foam provides maximum comfort for everyone.
Base: grip, foothold, cushioning and thermal insulation
Our new ULTRALIGHT sole is made solely from EVA. EVA is a very light material, 80% air. This design is able to resist abrasion whilst upholding the cushioning properties. It is naturally very insulating and protects from the cold where it is raised from the ground. We have added wide studs for greater grip, which are quite spaced out so that snow does not get stuck in between them.

Users reviews

Write the first review

Post a comment