H 350 grey adult ski and snowboard helmet.

Ref :
8399930
Key feature
2 in 1 helmet! Head and eyes protection, flexible ear hooks for more comfort and a type visor. All with an InMold construction for a low weight!
£59.99*

3 colors

User benefits

Stability
Head size adjustment dial.
Ventilation
10 holes to aerate and evacuate humidity
Lightweight
The lightest of our visor helmets (InMold type construction)! 510 g in M
Impact protection
Complies with standard EN 1077-B. InMold type structure for more lightness.
Easy maintenance
The inner hat of the helmet is detachable and machine washable at 30°C.
Warmth
Inner cap with small mesh surface for thermal regulation.
Sun protection
UV resistant, anti-fog, all-weather visor (category S1).
Flexibility
"Bad weather" specific yellow visor, available to purchase on the Internet.

Technical information

Composition
Foam : 100.0% Polystyrene (EPS) - Expanded Outer fabric : 100.0% Polycarbonate (PC)
Approved by
All of our helmets are approved by an external accredited laboratory
Tests
All Wed'ze products are tested under the real conditions of use for which they were designed: on the snow, in the cold, and under all the conditions you may encounter when skiing. The design teams, the product leaders, the engineers and the pattern makers ensure that the programme for which the product has been conceived and developed corresponds perfectly to its usage on the slopes.
Designed to :
skiers or snowboarders looking for a light visor helmet
Warranty
2 years

Advice

Storage instructions
Dry thoroughly before storing in its Wed'ze bag. Always carry your helmet in its cover to avoid scratches on the screen.
Restrictions for use
Replace any helmet that has sustained an impact.

Features of the product

Turnering System
Turnering is an essential element for effective maintenance of your helmet. This system allows you to adjust easily and precisely at any time thanks to a knob accessible even with your ski gloves. It gives you comfort of use and maximum safety. Turn the clip to the right to screw and to the left to unscrew.
Venting System
The Venting System improves thermal regulation in your helmet and reduces fogging in your mask. This type of design guides the air to evacuate heat and humidity, taking into account the entire helmet-goggles interface.
Light Shell Construction
The Light Shell Construction allows the building of very lightweight helmets. This technique called In-Mold creates an external poly-carbonate casing directly melded on the EPS skullcap. The inner EPS skullcap absorbs the shock during impact. It is overall very light. We advise you to change your helmet at least every 5 years unless it has sustained an impact in the interim.
EN 1077 STANDARD
EN 1077 standard is a European standard applicable to helmets used for cranial protection when doing alpine ski or snowboarding. A feature of this standard are the tests undertaken to check the shock absorption properties and the resistance to penetration.
Removable textile
The removable inner part can be washed. The inner cap of this ski helmet is detachable and machine washable at 30°C.
After-sales service
Some detached parts of the H 350 helmet are available in SAV at our stores' workshop. Available: the original visor of type S3; and the bolt kit to fix the visor (screws and spacers).

Users reviews

Write the first review

Post a comment
HAUT DE PAGE