Adult ski and snowboarding helmet Carv 700 Mips black.

Ref :
Key feature
The innovative MIPS technology integrated in this helmet make it more secure in the case of an impact.

User benefits

Adjustment wheel, adjustable for height and ears, with neck contour.
9 holes for ventilation, 6 can be adjusted with a simple sliding button.
Lighter weight than the average of our helmets. 490g in size M.
Impact protection
Complies with standard EN 1077-B. MIPS technology for better protection.
Easy maintenance
Removable inner helmet foam washable by machine at 30° C.
Reverse anti-cold bar (front). Thick lining around ears and neck.
Wed'ze helmets and goggles are designed to form an integrated whole.

Technical information

In 56-59 and 59-62 cm
Foam : 100.0% Polystyrene (EPS) - Expanded Outer fabric : 100.0% Polycarbonate (PC)
Approved by
All our helmets are certified by an external approved laboratory.
All Wed'ze products are tested under the real conditions of use for which they were designed: on the snow, in the cold, and under all the conditions you may encounter when skiing. The design teams, product managers, engineers, and designers make sure that the program for which the product has been designed and developed is perfectly suited for its field use.
Designed to :
for the skier or snowboarder looking for a lightweight, well-ventilated helmet that incorporates MIPS technology.
2 years


Storage instructions
Do not store the helmet in a damp place, near a source of heat or UV rays. After drying, the best place to store it is in a cotton bag.
Restrictions for use
Replace any helmet that has sustained an impact.

Features of the product

Turnring system
Turnering is an essential part of your helmet. This system allows you to adjust easily and precisely at any time thanks to a knob accessible even with your ski gloves. It thus gives you comfort of use and maximum safety. Turn the clip to the right to screw and to the left to unscrew.
Full Earpad
The Full Earpad is an ear design that offers better support, more warmth and therefore more comfortable to use. The two ears are made of a single textile piece, thus forming a contour around the neck. The clip adjustment system is built into the neck contour.
Activ Air Cooling System
The Active Air Cooling System improves the thermal regulation in your helmet and reduces fogging in your mask. This design guides the air flow in order to eliminate warmth and moisture, while taking into account the entire helmet-goggles interface. You can control this airflow with the help of a cooling button on the top of the helmet.
Light Shell Construction
The Light Shell Construction makes it possible to develop exceptionally light helmets. This technique, called In-Mold, forms an external polycarbonate shell, that is directly moulded on the EPS liner. The inner EPS lining absorbs the shock during impact. The entire assembly is very light. We recommend changing your ski helmet every 5 years maximum as long as it has not undergone a major shock during this time.
MIPS Technology
MIPS is a technology which allows the interior surface of the helmet to move independently from the exterior shell. In case of impact, the rotational forces will be dissipated better thanks to the range of movement from 10 to 15 mm.
RECCO System
The RECCO® search and rescue system features dual technology which supports the majority of ski rescue teams. The RECCO® detector used by rescue teams emits a directional signal. The RECCO® reflector built into the jacket returns the signal. This generates an audible sound which guides rescue personnel directly to the person needing assistance. Before setting out, make sure you get the information you need from the professionals of the resort
Cold barrier
The Cold Barrier provides the real benefit of warmth. During your ski or snowboard sessions, a cold bar feeling can be created on your forehead. This is owing to a large gap between the top of the mask and the helmet. The inner cap (or comfort foam) has a hem at the forehead level, which when folded protects you from the cold, creating a thermal barrier between the helmet and the goggles.
Removable textile
The internal ski helmet foam is detachable and machine-washable at 30°C.
The EN 1077 standard is a European standard that applies to helmets used for skull protection when downhill skiing or snowboarding. A feature of this standard are the tests undertaken to check the shock absorption properties and the resistance to penetration.

Users reviews

Write the first review

Post a comment