8 Screws And 8 Spacers For Snowboard Bindings

Ref :
2778679
Key feature
Screws for snowboard bindings, with spacers.
Users reviews
4.44 / 5 9 ratings
£4.50*

User benefits

Capacity
8 screws and 8 washers.
Easy assembly / dismantling
Phillips screwdriver, ideally a PZ3.
Stability
Sold with thread-locking adhesive to prevent them from loosening.
Corrosion resistance
Stainless steel.

Technical information

Composition
Screws : 100.0% Stainless steel
Designed to :
fixing bindings onto your snowboard.
Warranty
2 years

Advice

Restrictions for use
The screw should not be more than 6 mm higher than the disc.

Features of the product

Compatibility with bindings
Please note: these screws are suitable for most bindings, however we recommend checking that your binding takes such screws. To do this, remove your binding and take the central disc, place 1 screw + 1 washer in one of the housings. Measure the length of the screw which is higher than the disc: the part which is in the board inserts. If the screw length is > 6 mm after tightening, you must twist the snowboard base opposite each screw.

Users reviews

4.44 / 5 9 ratings
9 users recommended this product
Distribution of the scores
  • Man
    30-39 years old
    28 February 2017
    Use since 1 week or less
    That review has been deposited on this product version
    api.label.reviewFlag.checkedPurchase.title
    Conforme a la description

    Vis qui correspondent a l usage. Voir si elles ne rouillent pas dans le temps comme mes précédentes. Livraison et commande au top

  • Man
    30-39 years old
    27 February 2017
    Use since 2 to 8 weeks
    That review has been deposited on this product version
    api.label.reviewFlag.checkedPurchase.title
    Satisfait du produit

    Satisfait du produit

  • Man
    50-59 years old
    09 February 2017
    Use since 1 week or less
    That review has been deposited on this product version
    api.label.reviewFlag.checkedPurchase.title
    super

    ras

HAUT DE PAGE