Nearly sold out

300 Kid Ski Mittens - Grey

Ref :
Key feature
These children's 300 gloves are easy to put on thanks to their wide zipped opening. High cuff to place above the sleeve and stop snow entering.

2 colors

User benefits

180 g/m² cotton wadding. Cotton mesh lining. Long wraparound cuff.
Coated fabric 2,000 mm. Waterproof insert on hand section.
Elasticated wrists. Cuff fastening. Zip opening for the thumb.
Freedom of movement
Pre-shaped mittens.
Ease of use
Wide zip opening. Can be placed over the jacket.

Technical information

18/24m, 3/4 years, 5/6.
Outer fabric : 100.0% Polyamide (PA) Padding : 100.0% Polyester (PES) Lining : 100.0% Cotton Palm : 56.0% Polyurethane (PU), Palm : 44.0% Polyester (PES)
All Wed’ze products are tested in the same real-life conditions in which they are used and for which they were designed: the snow, the cold and all the conditions you're likely to encounter when skiing. The design teams, product leaders, engineers and pattern makers ensure that the programme for which the product has been designed and developed corresponds perfectly to its use on the slopes.
Designed to :
for young regular skiers who need warm, waterproof mitts.
2 years


Care instructions
Machine wash at 30°C. Synthetic cycle. Turn inside out. Use a small amount of detergent. No softener. Second spin cycle possible. Dry flat in a well ventilated place. Do not tumble dry. Do not dry clean.
Storage instructions
Avoid folding, as this damages the tissue membrane. Make sure that the garment is completely dry before storing in a dry and well-ventilated place.

Features of the product

Wadding thermal insulation
Thermal insulation will keep your young skiers at the right temperature, neither too hot nor too cold. The garment adapts to the body's physical movement and to the outside environment. Wed'ze uses wadding for insulation to keep the body warm. This synthetic wadding containing polyester stores more or less air, depending on the size of the fibres. So the thicker the wadding, the more air it contains, and the warmer it is.
We measure a fabric's resistance to a water column, in mm (based on the ISO 811 standard). The higher the water pressure withstood, the more watertight the fabric. A component with a waterproofing resistance of 2000 mm resists the pressure of 2000 mm of water.

Users reviews

Write the first review

Post a comment